Flow Cytometry

Specification of Flow Cytometry

Optical System:

1. Laser configuration: 488nm solid-state laser is used, which can excite at least four fluorescent dyes at the same time, laser power ≥40mW;

2. Spatial three-dimensional excitation mode, fixed optical path without adjustment, overall temperature control of the optical system;

3. Linear optical path design, optical filters can be replaced with experimental needs;

4. The instrument is equipped with an avalanche photodiode (APD) to improve photoelectric conversion efficiency;

Analytical Performance:

1. Fluorescence sensitivity: FITC≤200MESF, PE≤100MESF;

2. Fluorescence Linearity:≥0.98;

3. Instrument detection resolution (full peak width CV of forward angle scattered light and fluorescence channel): FSC≤2.0%; FL1(FITC) ≤2.0%; FL2(PE)≤2.0%;

4. Resolution of forward angle scattered light and lateral angle scattered light: able to separate red blood cells and platelets in peripheral blood; able to separate the three groups of white blood cells (lymphocytes, monocytes and granulocytes) in peripheral blood;

5. Detection sensitivity of forward angle scattered light : ≤1.0μm;

6. Test carrying contamination rate ≤0.5%, after each test is completed, the flow chamber sample needle can be automatically cleaned to avoid cross contamination

7. Highest event rate : ≤50000 cells per second;

8. Compatible volume method and microsphere method absolute counting;

Sample Loading System:

1. Use a syringe to load the sample;

2. Compatible with a variety of centrifuge tubes and flow cytometry tubes;

3. With four different speed modes for sample loading, different modes can be selected according to actual sample processing requirements;

Sample speed adjustment

Software System:

1. Full-matrix fluorescence compensation，the instrument supports online and offline compensation;

2. The single software supports data acquisition and data analysis at the same time and can edit reports on the software, and can directly generate FCS files without special operating software;

3. The operating system supports Microsoft WIN10 system;

Others:

The host can be placed in a single clean bench for test operations

Product Physical Characteristics :

Dimension:250mm*280mm*250mm

Weight：10KG

Power Supply ：AC 100-240V，50/60Hz